I did not show you all the messages i am getting in my event Viewer. I am also getting these 2 errors repeadedly.
" A check condition error has occured on device \Device\lb0.0.0.1 during Move Medium with completion code DD_MEDIA_NOT_EJECTED. Refer to the device's SCSI reference for appropriate action. Dump Data: byte 0x3E=KEY, byte 0x3D=ASC, byte 0x3C=ASCQ " and this one "The device, \Device\ScsiPort1, did not respond within the timeout period. " I have tested to replace my SCSI Atapder with no sucess. > Petur, > > I had a similar experience with LVD SCSI cable to a 3584. It turned out to > be a loose pin or bent pin in the connector. Once we replaced the cable > everything worked fine. Have your CE checkit it out or try a different > cable. > > Good luck. > > George Cardoza > Sr. IT Specialist > VIP Ltd., Inc. > > > > > -----Original Message----- > From: Petur Eythorsson [mailto:[EMAIL PROTECTED]] > Sent: Friday, November 02, 2001 6:18 AM > To: [EMAIL PROTECTED] > Subject: Repeded I/O Error on drives. HELP!! > > > Hi I have a problem. > > I am using TSM Server 4.2.1.4 WIN NT > I have a Qualstar Library TLS-8433 > I have 2 IBM Ultrium 3580 drives (firmware 16E0) > > This is a new library and, we are having repeded I/O Errors witch look like > this. > > " > 11/01/2001 13:09:33 ANR8302E I/O error on drive LTODRV1 (\\.\TAPE0) > (OP=READ, > Error Number=1117, CC=0, KEY=2B, ASC=4B, ASCQ=00, > > SENSE=F0.00.2B.00.00.80.00.1C.00.00.00.00.4B.00.00.00.00- > > ..00.00.00.00.02.00.00.00.00.00.00.00.0E.00.00.E5.6A.01.0- > 0, Description=An undetermined error has > occurred). > Refer to Appendix D in the 'Messages' manual for > recommended action. > > " > > And sometimes this > > > "ANR8302E I/O error on drive LTODRV2 (\\.\TAPE1) (OP=OFFL, Error Number=21, > CC=0, KEY=00, ASC=00, ASCQ=00, > SENSE=**NONE**, > Description=An undetermined error has occurred). Refer to Appendix D in the > 'Messages' manual for recommended action." > > has anyone seen this? > > When Space Reclimation starts it can only move about 75-90% of the tape and > the > rest it always get a I/O error. > > > I get this error in my event log > > > "The description for Event ID ( 0 ) in Source ( Ultrium ) could not be > found. > It contains the following insertion string(s): \Device\Tape1." > > I have verified that > > > Dos anyone know what this means? > > Please help me! > > Petur Eythorsson > [EMAIL PROTECTED] > Iceland > > > > > > > > > > ------------------------------------------------------- > ^essi skilabop voru send mep vefpssti Fjarskiptafilagsins Tmtan. > Slspin er: http://postur.itn.is/ ------------------------------------------------------- ^essi skilabop voru send mep vefpssti Fjarskiptafilagsins Tmtan. Slspin er: http://postur.itn.is/
