Petur, I had a similar experience with LVD SCSI cable to a 3584. It turned out to be a loose pin or bent pin in the connector. Once we replaced the cable everything worked fine. Have your CE checkit it out or try a different cable.
Good luck. George Cardoza Sr. IT Specialist VIP Ltd., Inc. -----Original Message----- From: Petur Eythorsson [mailto:[EMAIL PROTECTED]] Sent: Friday, November 02, 2001 6:18 AM To: [EMAIL PROTECTED] Subject: Repeded I/O Error on drives. HELP!! Hi I have a problem. I am using TSM Server 4.2.1.4 WIN NT I have a Qualstar Library TLS-8433 I have 2 IBM Ultrium 3580 drives (firmware 16E0) This is a new library and, we are having repeded I/O Errors witch look like this. " 11/01/2001 13:09:33 ANR8302E I/O error on drive LTODRV1 (\\.\TAPE0) (OP=READ, Error Number=1117, CC=0, KEY=2B, ASC=4B, ASCQ=00, SENSE=F0.00.2B.00.00.80.00.1C.00.00.00.00.4B.00.00.00.00- .00.00.00.00.02.00.00.00.00.00.00.00.0E.00.00.E5.6A.01.0- 0, Description=An undetermined error has occurred). Refer to Appendix D in the 'Messages' manual for recommended action. " And sometimes this "ANR8302E I/O error on drive LTODRV2 (\\.\TAPE1) (OP=OFFL, Error Number=21, CC=0, KEY=00, ASC=00, ASCQ=00, SENSE=**NONE**, Description=An undetermined error has occurred). Refer to Appendix D in the 'Messages' manual for recommended action." has anyone seen this? When Space Reclimation starts it can only move about 75-90% of the tape and the rest it always get a I/O error. I get this error in my event log "The description for Event ID ( 0 ) in Source ( Ultrium ) could not be found. It contains the following insertion string(s): \Device\Tape1." I have verified that Dos anyone know what this means? Please help me! Petur Eythorsson [EMAIL PROTECTED] Iceland ------------------------------------------------------- ^essi skilabop voru send mep vefpssti Fjarskiptafilagsins Tmtan. Slspin er: http://postur.itn.is/
