Hi Stuart,
Compaq MSL5026 is supported in TSM 4.2.1. I noticed in your note that you
have TSM 4.2.
Hunny Kershaw..
Joe Cascanette
<Joe.Cascanette@C To: [EMAIL PROTECTED]
UMIS.COM> cc:
Sent by: "ADSM: Subject: Re: TSM on a SAN.
Dist Stor
Manager"
<[EMAIL PROTECTED]
.EDU>
02/01/2002 10:07
AM
Please respond to
"ADSM: Dist Stor
Manager"
Our setup here is Windows 2000 server, with TSM 4.2.1.6 connected to a
Compaq SAN via fibre switch. We have a Modular Data Router connected to a
9236EX DLT library and to the SAN via fibre, this MDR takes data via the
fibre and sends it down the SCSI cable to library.
Not sure if you need a MDR or not, depends if you have direct fibre
attachment to the library or not. All server connected to the SAN will be
able to see the library unless you put restriction in.
-----Original Message-----
From: Joshua S. Bassi [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 01, 2002 12:24 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM on a SAN.
What type of library is it? What Fibre Channel components are you
using?
--
Joshua S. Bassi
Sr. Solutions Architect
IBM Certified - AIX/HACMP, SAN, Shark
Tivoli Certified Consultant- ADSM/TSM
Cell (415) 215-0326
[EMAIL PROTECTED]
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Stuart Pitt
Sent: Friday, February 01, 2002 5:50 AM
To: [EMAIL PROTECTED]
Subject: TSM on a SAN.
Hi,
TSM 4.2 NT 4 SP6a
Library Compaq MSL5026
Currently trying to get TSM working on a San. I am unable to see the
library, that is also on the San. Do I need an additional piece of
software,
or am I doing something wrong.
Regards
Stuart
************************************************************************
****
The information contained in this email is intended only for the
use of the intended recipient at the email address to which it
has been addressed. If the reader of this message is not an
intended recipient, you are hereby notified that you have received
this document in error and that any review, dissemination or
copying of the message or associated attachments is strictly
prohibited.
If you have received this email in error, please contact the sender
by return email or call 01793 877777 and ask for the sender and
then delete it immediately from your system.
Please note that neither Innogy nor the sender accepts any
responsibility for viruses and it is your responsibility to scan
attachments (if any).
************************************************************************
*****
