We recently made this work at one of our sites. No problems. Pretty cool actually. Even taught ourselves how to zone stuff and everything. We did have a problem with a Storage Agent client in the config. I don't know what ever happened with that, though.
Kelly J. Lipp Storage Solutions Specialists, Inc. PO Box 51313 Colorado Springs, CO 80949 [EMAIL PROTECTED] or [EMAIL PROTECTED] www.storsol.com or www.storserver.com (719)531-5926 Fax: (240)539-7175 -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Hunny Kershaw Sent: Friday, February 01, 2002 5:19 PM To: [EMAIL PROTECTED] Subject: Re: TSM on a SAN. Hi Stuart, Compaq MSL5026 is supported in TSM 4.2.1. I noticed in your note that you have TSM 4.2. Hunny Kershaw.. Joe Cascanette <Joe.Cascanette@C To: [EMAIL PROTECTED] UMIS.COM> cc: Sent by: "ADSM: Subject: Re: TSM on a SAN. Dist Stor Manager" <[EMAIL PROTECTED] .EDU> 02/01/2002 10:07 AM Please respond to "ADSM: Dist Stor Manager" Our setup here is Windows 2000 server, with TSM 4.2.1.6 connected to a Compaq SAN via fibre switch. We have a Modular Data Router connected to a 9236EX DLT library and to the SAN via fibre, this MDR takes data via the fibre and sends it down the SCSI cable to library. Not sure if you need a MDR or not, depends if you have direct fibre attachment to the library or not. All server connected to the SAN will be able to see the library unless you put restriction in. -----Original Message----- From: Joshua S. Bassi [mailto:[EMAIL PROTECTED]] Sent: Friday, February 01, 2002 12:24 PM To: [EMAIL PROTECTED] Subject: Re: TSM on a SAN. What type of library is it? What Fibre Channel components are you using? -- Joshua S. Bassi Sr. Solutions Architect IBM Certified - AIX/HACMP, SAN, Shark Tivoli Certified Consultant- ADSM/TSM Cell (415) 215-0326 [EMAIL PROTECTED] -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of Stuart Pitt Sent: Friday, February 01, 2002 5:50 AM To: [EMAIL PROTECTED] Subject: TSM on a SAN. Hi, TSM 4.2 NT 4 SP6a Library Compaq MSL5026 Currently trying to get TSM working on a San. I am unable to see the library, that is also on the San. Do I need an additional piece of software, or am I doing something wrong. Regards Stuart ************************************************************************ **** The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system. Please note that neither Innogy nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any). ************************************************************************ *****
