Hello All, I am getting the following error from two of my three drives in the IBM3583 library while trying to verify the label on the tape volume:
ANR8302E I/O error on drive DRIVE3 (mt3.0.0.5) (OP=READ, Error Number=1117, CC=0, KEY=00, ASC=00, ASCQ=00, SENSE=70.00.00.00.00.00.00.1C.00.00.00.00.00.00.00.00.00- .00.00.00.00.01.20.20.20.20.20.20.20.00.00.00.06.9D.03.0- 0.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.- 00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00- .00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0- 0.00.00.00.00, Description=An undetermined error has occurred). Refer to Appendix D in the 'Messages' manual for recommended action. The library is attached to a Compaq Proliant ML350 running Windows 2000 Advances server via a Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller which is actually a Adaptec 39160 controller OEM by Compaq. The two drives were replaced by IBM but that didn't help. I have the latest firmware on the library and the tape drives. Anyone have a clue what is going on here? Thanks Anwer Adil LAN Administrator Columbia University Law School PH: (212) 854-5611 FX: (212) 854-1749 EM: [EMAIL PROTECTED]
