That's curious!!! Now I'm in doubt. I think that you have to use the TSM SCSI Device Driver. What I'm not seeing is the library device. It's something like "lb0". If not first try to create through SMIT DEVICES -> Tivoli Storage Manager Devices -> SCSI Attached Devices -> Library/MediumChanger -> Add a Library/MediumChanger. Select the type ADSM library and the controller. In your case is the controller connected on slot 1P-08. The connection address seems to be 3,0. After that try to define the devices: tsm> define library <library_name> libt=scsi tsm> define path <source_name> <dest_name> srct=server destt=library device=/dev/lb0 tsm> define drive <library_name> <drive_name> element=31 tsm> define drive <library_name> <drive_name> element=32 tsm> define path <source_name> <dest_name> srct=server destt=drive device=/dev/mt1 tsm> define path <source_name> <dest_name> srct=server destt=drive device=/dev/mt2
Regards, Anderson ----- Original Message ----- From: "Scott Figgins" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, June 23, 2003 10:17 AM Subject: Re: oops forgot the error message. Anderson/Group - # lsdev -Cc tape rmt0 Available 1P-08-00-0,0 4.0 GB 4mm Tape Drive rmt1 Available 1P-08-00-2,0 4.0 GB 4mm Tape Drive smc0 Available 1P-08-00-3,0 IBM 7336 Tape Medium Changer # lsdev -Cc adsmtape mt0 Available 1P-08-00-0,0 Tivoli Storage Manager Tape Drive mt1 Available 1P-08-00-2,0 Tivoli Storage Manager Tape Drive # I used the Webgui to define the library. But nowhere on that panel does it ask for any scsi ID or anything. Just a Library name and if it's shared or not. Thanks again everyone. Scott They show up here.. But when I try to install the Quoting "Anderson F. Nobre" <[EMAIL PROTECTED]>: > Scott, > > Are you using the TSM SCSI Device Driver? > If yes, what's the target and LUN that you are using to define the library > device? > Can you type the following commands and show us the output? > # lsdev -Cc tape > # lsdev -Cc adsmtape > > Regards, > > Anderson > > ----- Original Message ----- > From: "Scott Figgins" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, June 23, 2003 12:46 AM > Subject: oops forgot the error message. > > > I'm getting this error in my Server log on AIX 5.1 with TSM 5.1.6.5 after > defining a 7336-205 4mm Tape library. Any ideas? IBM says this library is > supported in the BASE codeset. > > 06/22/03 22:54:26 ANR8843E Initialization failed for SCSI library > AUTOLIB1 - > the library will be inaccessible. > 06/22/03 22:54:26 ANR8441E Initialization failed for SCSI library > AUTOLIB1. > > > > Any help is appreciated. > Scott Figgins > IBM Cate > [EMAIL PROTECTED] > > ------------------------------------------------- > This mail sent through IMP: http://horde.org/imp/ > ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/
