I'm guessing that you will eventually end up with an error message stating that there was no match found, or something to that effect. It may take a long time to get to that point. Backupsets can be very slow to process; you typically wind up reading through the entire tape before the command completes (or errors out).
There may also be inherent client compatibility issues that will prevent this from working at all. For one thing, the filespace naming format is completely different between NT and Netware.
If you did not specify a destination for the restore, there will be no filespace/drive that matches the source on the server that you are running the restore from.
It's always a good idea to specify a destination on a restore like this, anyway - prevents nasty things like overwriting data on the production server across the network, rather than restoring data to the test box that the restore is running on.
Ted
At 10:23 AM 9/29/2003 -0500, you wrote:
Although this shouldn't matter, I am running TSM 5.1.7.1 on AIX 4.3.3.
We are moving a large number and size of files from a Netware server to an NT server, and I am trying to come up with a way to help the process so we don't have to use a workstation to copy files from a Netware mount to a Windows mount (which really slows things down because the data has to travel from the Netware server to the workstation and then to the NT server all on one network connection).
I can't give client access rights to an NT server for Netware backups because of the file/folder rights/properties/attributes issues. So, my bright idea was to generate a backupset of the Netware volume to the TSM server, delete the backup set, define that tape volume to the NT server as a backup set, and restore the data from TSM (my understanding is a backupset is unencrypted backups with no rights/properties information... just files and folders, perhaps readonly, hidden etc attributes included). The generate backupset went well (after I used move nodedata to place all the files on one tape). The delete and define had no noticeable issues. We are trying to do the restore of the backupset to the NT server now, but nothing is moving. The session started only has 4.5K sent and 694bytes rcv'd. It has been sitting like that for 20 minutes. I visually checked the tape drive, and the light is flashing as if the drive is doing something (LTO library). The NT admin verifies that there are no folders/files restored.
Was this a pipe dream to begin with?
