Sorry, but this happens on 10/half hard set also! Regard,
Karel -----Oorspronkelijk bericht----- Van: Dan Foster [mailto:[EMAIL PROTECTED] Verzonden: woensdag 17 december 2003 10:20 Aan: [EMAIL PROTECTED] Onderwerp: Re: anyone had network problems with 3584? Hot Diggety! i love tsm was rumored to have written: > > The two 3584s that I run have both recently gone off the air,i.e I can't > ping them. They both have green link lights on the NIC. They are set to > 100/Full although I have tried Auto and 100/half. 3584 Operator Guide recommends they be set to 10/half (if hub) or 10/full (if switch). They do not work real well at 100 Mbps, and they haven't quite ironed out the culprit despite multiple revisions of library firmware, from my understanding. We have given up on ever getting it to work reliably at 100 Mbps. Seems fine at 10 Mbps, especially if the switch port is hardcoded to match the 3584 enet settings exactly. Don't really trust autonegotiation. IBM CE was here recently for a firmware upgrade and he had some internal IBM documentation for himself (recently issued) that still advised if Ethernet was hooked up, to set it to 10 Mbps only. -Dan
