Hello Chris, I'm a new TSM 5.2 user, on Linux, AIX and NT. We purchased an IBM fiber SAN, fiber switch, and IBM fiber Ultrium 3582 Tape Library (with two LTO2s) at the same time. The 3582 is un-accessible too, after a week or so, via it's LAN cable for web access, which I don't really use anyway, as too slow to move around in. Otherwise, the 3582 tape library seems to be working fine. To re-access via LAN, I pull out the small Ethernet card and re-plug back into the 3582.
CharlieH -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of Redell, Greg S. Sent: Wednesday, December 17, 2003 9:38 AM To: [EMAIL PROTECTED] Subject: Re: anyone had network problems with 3584? I have to admit that I don't use the web interface all that much on the 3584. But when I do, it seems like I have to go down to it and unplug the enet cable and plug it back in to get to it. -----Original Message----- From: i love tsm [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 17, 2003 3:10 AM To: [EMAIL PROTECTED] Subject: anyone had network problems with 3584? Hi All I just wondered if anyone else has had problems with their 3584's and there network connectivity. The two 3584s that I run have both recently gone off the air,i.e I can't ping them. They both have green link lights on the NIC. They are set to 100/Full although I have tried Auto and 100/half. The network switch port is set to 100/Full and sees a device connected at the other end, its sending packets out to the library but not getting any back. I've tried disabling and reenabling ethernet on the libraries. Do I need to reboot the libaries? Has anyone else had problems like this? TIA Chris _________________________________________________________________ Use MSN Messenger to send music and pics to your friends http://www.msn.co.uk/messenger
