ok thanks again Rama and Bill, Here's and example! Of a script that I would run every 2 hours.
run query stgpool then "run update stgpool backuppool highmig=60 lowmig=30" when complete "run query stgpool command" Thanks Bill Kelly wrote: > I think that's correct; if you want the scripts to run in parallel, you'll > need multiple admin schedules. If you want the scripts to run serially, you > could kick off the first script via an admin schedule, then have that script > run the second script, and so on... > > -Bill > > Bill Kelly > Auburn University OIT > 334-844-9917 > > >>> [EMAIL PROTECTED] 02/08/06 9:04 AM >>> > Multiple scripts inside an admin schedule? > I believe each schedule can contain one cmd/script... > You may have to create multiple schedules, one for each server script. > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Timothy > Hughes > Sent: Wednesday, February 08, 2006 9:55 AM > To: [email protected] > Subject: Re: [ADSM-L] AW: [ADSM-L] Automating server scripts > > Thanks to all! > > I know about the admin scheduler already, I just wasn't > sure if I could put multiple scripts inside a admin schedule > and run them simultaneously say every 3 hours. I guess > I would use multiple run commands? > > Thanks again! > > Bill Kelly wrote: > > > Sorry...obviously, one should substitute > > > > cmd="run script-name" > > > > for > > > > cmd="q proc" > > > > but you all knew what I meant. :-) > > > > > To be more specific, set up the schedule with something a>long the lines > > > of this: > > > def sched queryproc t=a desc="query processes" cmd="q proc" > > > startt=13:59:00 dur=15 duru=m day=any per=1 peru=hours active=yes > > > Which will run the script every hour at (roughly) xx:59:00 > > > > -Bill > > > > >>> [EMAIL PROTECTED] 02/08/06 7:49 AM >>> > > Simple:Build an admin scheduler with command run script ;-) > > > > > > > > -----Ursprüngliche Nachricht----- > > Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von > > Timothy Hughes > > Gesendet: Mittwoch, 8. Februar 2006 14:48 > > An: [email protected] > > Betreff: [ADSM-L] Automating server scripts > > > > Hello, > > > > Does anyone know of a way to Automate sever scripts to run on there own?? I > > have scripts set up that I would like to run say every two hours. I know to > > run a script you would use the run command but can that be automated? > > > > TSM 5.3.2.1 > > AIX 5.3 > > > > Thanks for any help or suggestions > > > > Regards > -------------------------------------------------------- > > If you are not an intended recipient of this e-mail, please notify the > sender, delete it and do not read, act upon, print, disclose, copy, retain or > redistribute it. Click here for important additional terms relating to this > e-mail. http://www.ml.com/email_terms/ > --------------------------------------------------------
