NB: This email and its contents are subject to our email legal notice which can be viewed at http://www.sars.gov.za/Email_Disclaimer.pdf
---- Good day I am battling to get the adic fastor 2 tape library working on TSM, my configuration is as follows Tsm server version 5.3.4 on windows 2003 standard edition Adic fastor 2 Libray firmware S44R and drive firmware 1702 My path definitions are as follows Define path bks01 adicfs2 srct=server destt=drive device=lb0.0.0.5 online=yes Define path bks01 drive0 srct=server destt=drive library=adicfs2 device=mt6.0.0.5 online=yes Every time I try to label the tapes or run the migration, I get the error below ANR8302E I/O error on drive DRIVE0 (mt6.0.0.5) with volume (OP=SETMODE, Error Number=87, CC=207, KEY=05, ASC=26, ASCQ=00, SENSE=70.00.05.00.00.00.00.1E.00.00.00.00.26.00.00.8D.00.0C.00.00.00.00. , Description=Device is not in a state capable of performing request). Refer to Appendix D in the 'Messages' manual for recommended action. ANR8357I Error reading label of volume from slot-element 2 in drive DRIVE0 (mt6.0.0.5) of library ADICFS2. Is there anything that I missed? Any help much appreciated.
