Hi to all Hi have two exchange node I backup with lanfree version 6.3.4 , the configuration are correct success to backup them with lanfree TSM server version 6.3.4 TDP for Exchange version 6.4.1
For Node ExchsrvAn_SA: (Incr backup) 09/24/2013 19:26:00 ANE4971I (Session: 5707, Node: EXCHSRVAN_DB) LanFree data bytes: 19.41 GB (SESSION: 5707) For Node ExchsrvBn_SA: (Incr backup) 09/24/2013 20:16:00 ANE4971I (Session: 5803, Node: EXCHSRVBN_DB) LanFree data bytes: 23.51 GB (SESSION: 5803) I have sandiscovery on both dsmsta.opt I run on each server Q SAN , on ExchsrvAn_SA I see the correct output . 10 virtual drives from DataDomain and 2 physical LTO5 drives + Changer. But on ExchsrvBn_SA I see only the 2 physical LTO5 drives + Changer and do not see the virtual drives !! As I said when running a backup on ExchsrvB I see the correct drives mounted on the correct paths define ! Here the output’s tsm: ADSM2>exchsrvan_sa:q san ANR1699I Resolved EXCHSRVAN_SA to 1 server(s) - issuing command Q SAN against server(s). ANR1687I Output for command 'Q SAN' issued against server EXCHSRVAN_SA follows: Device Vendor Product Serial Number Device Type -------- -------- ---------------- ---------------------- -------------------- DRIVE IBM ULTRIUM-TD3 G030260041 Tape0 DRIVE IBM ULTRIUM-TD3 G030260044 Tape1 DRIVE IBM ULTRIUM-TD3 G030260046 Tape2 DRIVE IBM ULTRIUM-TD3 G030260047 Tape3 DRIVE IBM ULTRIUM-TD3 G03026005B Tape4 DRIVE IBM ULTRIUM-TD3 G03026005C Tape5 DRIVE IBM ULTRIUM-TD3 G03026005D Tape6 DRIVE IBM ULTRIUM-TD3 G03026005E Tape7 DRIVE IBM ULTRIUM-TD3 G03026005F Tape8 DRIVE IBM ULTRIUM-TD3 G030260060 Tape9 DRIVE IBM ULT3580-HH5 1068090833 Tape10 LIBRARY IBM 3573-TL 00L4U78T4363_LL0 Changer0 DRIVE IBM ULT3580-HH5 1068090782 Tape11 ANR1688I Output for command 'Q SAN' issued against server EXCHSRVAN_SA completed. ANR1694I Server EXCHSRVAN_SA processed command 'Q SAN' and completed successfully. ANR1697I Command 'Q SAN' processed by 1 server(s): 1 successful, 0 with warnings, and 0 with errors. tsm: ADSM2>exchsrvbn_sa:q san ANR1699I Resolved EXCHSRVBN_SA to 1 server(s) - issuing command Q SAN against server(s). ANR1687I Output for command 'Q SAN' issued against server EXCHSRVBN_SA follows: Device Vendor Product Serial Number Device Type -------- -------- ---------------- ---------------------- -------------------- DRIVE IBM ULT3580-HH5 1068090833 Tape10 LIBRARY IBM 3573-TL 00L4U78T4363_LL0 Changer0 DRIVE IBM ULT3580-HH5 1068090782 Tape11 ANR1688I Output for command 'Q SAN' issued against server EXCHSRVBN_SA completed. ANR1694I Server EXCHSRVBN_SA processed command 'Q SAN' and completed successfully. ANR1697I Command 'Q SAN' processed by 1 server(s): 1 successful, 0 with warnings, and 0 with errors. I miss something ? any ideas ? Best Regards Robert
