Hi Andy
Thank you for the reply
I double check in D.D configuration and the parameters are correct (WWPN ,
symbolic Port Name)
Initiator Group Status WWNN WWPN
Port
--------- ------------- ------ -----------------------
----------------------- ----
exchsrvb vtl_exchangeb Online 20:00:00:1b:32:18:7a:24
21:00:00:1b:32:18:7a:24 6a
Initiator Symbolic Port Name
Address Method
---------
-----------------------------------------------------------------------------------
--------------
exchsrvb QLE2460 FW:v5.07.02 DVR:v9.1.10.28
auto
On the access groups vtl_echangeb all my LUN (10) are configure with the
initiators WWPN 21:00:00:1b:32:18:7a:24
End what it's very strange the lanfree backup run fine , with the drives
configure in D.D and path's configure in Tsm
Run the command: validate lanfree exchsrvbn_db exchsrvbn_sa
EXCHSRVBN_DB EXCHSRVBN_SA BACKUP MGEXCHANGE VTL_EXCHANGE
Yes
EXCHSRVBN_DB EXCHSRVBN_SA BACKUP MGLTO5 LTO5
Yes
ANR1706I Ping for server 'EXCHSRVBN_SA' was able to establish a connection.
ANR0388I Node EXCHSRVBN_DB using storage agent EXCHSRVBN_SA has 2 storage pools
capable of LAN-free data movement and 0 storage pools not capable of LAN-free
data movement.
One is D.D Storage , the second is LTO5 storage
I did a check from the exchange server running the tsmdlst.exe utility and got
the correct output
c:\Program Files (x86)\Tivoli\TSM\console>tsmdlst.exe
Tivoli Storage Manager -- Device List Utility
Computer Name: EXCHSRVB
OS Version: 6.1
OS Build #: 7601
TSM Device Driver: TSMScsi - Not Running
3 HBAs were detected.
Manufacturer Model Driver Version Firmware
Description
----------------------------------------------------------------------------------------------------------------
Emulex Corporation LPe1150-E elxstor 7.2.30.016 2.70A5 EMC
LPe1150-E 4Gb PCIe Fibre Channel Adapter
Emulex Corporation LPe1150-E elxstor 7.2.30.016 2.80X4 EMC
LPe1150-E 4Gb PCIe Fibre Channel Adapter
QLogic Corporation QLE2460 ql2300.sys 9.1.10.28 5.07.02
QLogic QLE2460 Fibre Channel Adapter
TSM Name ID LUN Bus Port SSN WWN TSM
Type Driver Device Identifier
-----------------------------------------------------------------------------------------------------------------------------
mt0.10.0.5 0 10 0 5 G030260067 - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.11.0.5 0 11 0 5 G030260068 - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.12.0.5 0 12 0 5 G030260069 - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.13.0.5 0 13 0 5 G03026006A - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.14.0.5 0 14 0 5 G03026006B - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.15.0.5 0 15 0 5 G03026006C - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.16.0.5 0 16 0 5 G03026006D - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.17.0.5 0 17 0 5 G03026006E - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.8.0.5 0 8 0 5 G030260065 - LTO
IBM IBM ULTRIUM-TD3 8711
mt0.9.0.5 0 9 0 5 G030260066 - LTO
IBM IBM ULTRIUM-TD3 8711
mt1.0.0.5 1 0 0 5 1068090833 2002000E1114EA72 LTO
IBM IBM ULT3580-HH5 D2A1
lb1.1.0.5 1 1 0 5 00L4U78T4363_LL0 2002000E1114EA72
LIBRARY IBM IBM 3573-TL B.50
mt2.0.0.5 2 0 0 5 1068090782 2005000E1114EA72 LTO
IBM IBM ULT3580-HH5 D2A1
So if the backup run correctly meaning using lanfree with the correct drives
and paths configured why the q san still give me an incorrect output
Best Regards Robert
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of
Huebner, Andy
Sent: Tuesday, September 24, 2013 10:19 PM
To: [email protected]
Subject: Re: [ADSM-L] San question on Lanfree backup
Your storage agent should not see the changer. The TSM server owns the library
and will mount and unmount all tapes.
Verify that the zoning is correct for the missing drives. The STA must the
zoned to the ports you present the drives on.
Verify that the access group(s) are correct for the missing drives. The DD
must allow access (masking for the SAN people) to the drives from the port that
the STA is zoned to. This access is controlled by the WWN, so if you have more
than 1 access group be sure the correct WWN is in all of the groups.
Andy Huebner
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Robert
Ouzen
Sent: Tuesday, September 24, 2013 12:16 PM
To: [email protected]
Subject: [ADSM-L] San question on Lanfree backup
Hi to all
Hi have two exchange node I backup with lanfree version 6.3.4 , the
configuration are correct success to backup them with lanfree TSM server
version 6.3.4 TDP for Exchange version 6.4.1
For Node ExchsrvAn_SA: (Incr backup)
09/24/2013 19:26:00 ANE4971I (Session: 5707, Node: EXCHSRVAN_DB) LanFree
data bytes: 19.41 GB (SESSION: 5707)
For Node ExchsrvBn_SA: (Incr backup)
09/24/2013 20:16:00 ANE4971I (Session: 5803, Node: EXCHSRVBN_DB) LanFree
data bytes: 23.51 GB (SESSION: 5803)
I have sandiscovery on both dsmsta.opt
I run on each server Q SAN , on ExchsrvAn_SA I see the correct output . 10
virtual drives from DataDomain and 2 physical LTO5 drives + Changer.
But on ExchsrvBn_SA I see only the 2 physical LTO5 drives + Changer and do not
see the virtual drives !!
As I said when running a backup on ExchsrvB I see the correct drives mounted
on the correct paths define !
Here the output's
tsm: ADSM2>exchsrvan_sa:q san
ANR1699I Resolved EXCHSRVAN_SA to 1 server(s) - issuing command Q SAN against
server(s).
ANR1687I Output for command 'Q SAN' issued against server EXCHSRVAN_SA follows:
Device Vendor Product Serial Number Device
Type
-------- -------- ---------------- ----------------------
--------------------
DRIVE IBM ULTRIUM-TD3 G030260041 Tape0
DRIVE IBM ULTRIUM-TD3 G030260044 Tape1
DRIVE IBM ULTRIUM-TD3 G030260046 Tape2
DRIVE IBM ULTRIUM-TD3 G030260047 Tape3
DRIVE IBM ULTRIUM-TD3 G03026005B Tape4
DRIVE IBM ULTRIUM-TD3 G03026005C Tape5
DRIVE IBM ULTRIUM-TD3 G03026005D Tape6
DRIVE IBM ULTRIUM-TD3 G03026005E Tape7
DRIVE IBM ULTRIUM-TD3 G03026005F Tape8
DRIVE IBM ULTRIUM-TD3 G030260060 Tape9
DRIVE IBM ULT3580-HH5 1068090833 Tape10
LIBRARY IBM 3573-TL 00L4U78T4363_LL0
Changer0
DRIVE IBM ULT3580-HH5 1068090782 Tape11
ANR1688I Output for command 'Q SAN' issued against server EXCHSRVAN_SA
completed.
ANR1694I Server EXCHSRVAN_SA processed command 'Q SAN' and completed
successfully.
ANR1697I Command 'Q SAN' processed by 1 server(s): 1 successful, 0 with
warnings, and 0 with errors.
tsm: ADSM2>exchsrvbn_sa:q san
ANR1699I Resolved EXCHSRVBN_SA to 1 server(s) - issuing command Q SAN against
server(s).
ANR1687I Output for command 'Q SAN' issued against server EXCHSRVBN_SA follows:
Device Vendor Product Serial Number Device
Type
-------- -------- ---------------- ----------------------
--------------------
DRIVE IBM ULT3580-HH5 1068090833 Tape10
LIBRARY IBM 3573-TL 00L4U78T4363_LL0
Changer0
DRIVE IBM ULT3580-HH5 1068090782 Tape11
ANR1688I Output for command 'Q SAN' issued against server EXCHSRVBN_SA
completed.
ANR1694I Server EXCHSRVBN_SA processed command 'Q SAN' and completed
successfully.
ANR1697I Command 'Q SAN' processed by 1 server(s): 1 successful, 0 with
warnings, and 0 with errors.
I miss something ? any ideas ?
Best Regards
Robert
