I agree, just match them and then it doesn’t matter if the radio does the fancy stuff or not.
From: Mathew Howard Sent: Thursday, July 5, 2018 3:29 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Mimo Antenna Magic Yeah, that works with any wifi based radio, and Canopy, but I don't know that it works with airFiber... it seems to me that I tried it once, and it work very badly, but things could've changed since then. Why don't you just use a V/H dish for the new one? If you want to use the 23dbi airfiber dish, UBNT doesn't have a V/H equivalent, but there are plenty of other antennas that will do the job fine. On Thu, Jul 5, 2018 at 11:39 AM, <[email protected]> wrote: I wouldn't say there is no signal loss, but the white paper I read indicated that the circuit is able to extract information from both antennas and combine it in such a way that the SNR does not suffer. -----Original Message----- From: Nate Burke Sent: Thursday, July 5, 2018 10:32 AM To: Animal Farm Subject: [AFMUG] Mimo Antenna Magic Do I remember reading somewhere (possibly on this list) that because of the way that MIMO Works, you can have a 45 slant antenna on one end and a V/H antenna on the other end and there is no signal loss? I want to upgrade a Link; Rocket with a 2' dish (V/H) to Powerbridge, to a set of AFx radios 2'(V/H) to AFx antenna. I can't easily change the 2' dish to dual slant without replacing it, since it's not a UBNT dish, but the AFx dish on the other end will be dual slant. Would that work? -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
