If I recall...it’s able to combine the two signals and work. But at the expense of falling back to MIMO A (single data stream).
Jon Langeler Michwave Technologies, Inc. > On Jul 5, 2018, at 7:54 PM, Mathew Howard <[email protected]> wrote: > > The Canopy 450 platform definitely is able to do it. I've been told that by > people from Cambium who would know, and tested it myself. It may not have > always had that feature, but it is there in the newer firmware. > >> On Thu, Jul 5, 2018 at 4:38 PM, Colin Stanners <[email protected]> wrote: >> IIRC the Canopy 450 platform does not do the phase combining/differencing >> that allows to go from -+90deg to -+45deg antennas without >> signal/discrimination loss, as we did such a test on 900mhz 450I platform >> and saw half the speed when one end was rotated 45deg. >> >>> On Thu, Jul 5, 2018 at 4:29 PM, Mathew Howard <[email protected]> wrote: >>> Yeah, that works with any wifi based radio, and Canopy, but I don't know >>> that it works with airFiber... it seems to me that I tried it once, and it >>> work very badly, but things could've changed since then. Why don't you just >>> use a V/H dish for the new one? If you want to use the 23dbi airfiber dish, >>> UBNT doesn't have a V/H equivalent, but there are plenty of other antennas >>> that will do the job fine. >>> >>>> On Thu, Jul 5, 2018 at 11:39 AM, <[email protected]> wrote: >>>> I wouldn't say there is no signal loss, but the white paper I read >>>> indicated that the circuit is able to extract information from both >>>> antennas and combine it in such a way that the SNR does not suffer. >>>> >>>> -----Original Message----- From: Nate Burke >>>> Sent: Thursday, July 5, 2018 10:32 AM >>>> To: Animal Farm >>>> Subject: [AFMUG] Mimo Antenna Magic >>>> >>>> >>>> Do I remember reading somewhere (possibly on this list) that because of >>>> the way that MIMO Works, you can have a 45 slant antenna on one end and >>>> a V/H antenna on the other end and there is no signal loss? I want to >>>> upgrade a Link; Rocket with a 2' dish (V/H) to Powerbridge, to a set of >>>> AFx radios 2'(V/H) to AFx antenna. I can't easily change the 2' dish to >>>> dual slant without replacing it, since it's not a UBNT dish, but the AFx >>>> dish on the other end will be dual slant. Would that work? >>>> >>>> >>>> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
