The only reason I used it is because it was readily in stock and available.
For some reason when I need a singlemode configuration its out of stock.
So, I end up making the whole site MM


On 07/26/2018 07:04 PM, Chuck McCown wrote:
You could terminate MM with simple and cheap tools too.  For me that was the only advantage.  Even then I don't ever recall using it more than a couple times.

-----Original Message----- From: Bill Prince
Sent: Thursday, July 26, 2018 5:02 PM
To: af@af.afmug.com
Subject: Re: [AFMUG] Tower Fiber

Yup.

There was a time when multimode was a lot cheaper. The good news is that
he distance limitations on multimode meant that hey were always short
links. As it happens, you can often put a singlemode SFP in place of a
multimode SFP for those short links, and there will be enough margin for
them to work just fine.

bp
<part15sbs{at}gmail{dot}com>

On 7/26/2018 3:19 PM, Adam Moffett wrote:


On 7/26/2018 5:56 PM, Seth Mattinen wrote:
On 7/26/18 2:50 PM, Mike Hammett wrote:
Save yourself the hassle and never use multimode for anything.



Multimode is always a mistake at some point in its lifetime. Singlemode is forever.

Single mode is better in all cases.
The only reason for multimode was that the the transmitter for single mode is a laser and lasers were expensive.  Multimode uses LED transmitters which were cheaper.  VCSEL Lasers turned that upside down and single mode is the cheaper one now.  The fiber itself costs about the same.

There are always exceptions.  Last I knew the only "approved" SFP for a Telrad Compact was a multimode one.  The device will toss alarms if you put in any other SFP module. ....and I'll grant you that I last tried a 3rd party SFP about 2 years ago, so this could have changed, but it was definitely true in 2015 & 2016.  So all of our Compacts have a multimode fiber cable.  Cest La Vie.

It was also the case that SFPs with industrial temperature spec were cheaper in multimode.  I'm not sure if that's still true, but it was for awhile.





--
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to