I am using the tycon POE injector on plenty of AF24s. Never had an issue with it. Pretty positive it is the one Tycon says works with Airfiber. I remember being confused about pinout as well. Sure there is a thread around here or on the UBNT forums about it.
On Tue, Aug 28, 2018 at 12:10 PM, Adam Moffett <[email protected]> wrote: > I should have thought of Tycon. > > This thread > https://community.ubnt.com/t5/airFiber/poe48-or-50/td-p/343637 > says AirFiber PoE is 1,2,4,5+ and 3,6,7,8-. > That doesn't match the particular Tycon product, but I'll check their > catalog. > > > > On 8/28/2018 11:37 AM, Carl Peterson wrote: > > http://tycononline.com/TP-DCDC-4856G-VHP-36-72VDC-In- > 56VDC-70W-Passive-POE-Out-DCDC_p_28.html > > On Tue, Aug 28, 2018 at 11:32 AM, Adam Moffett <[email protected]> > wrote: > >> Can I connect an AirFiber to -48vdc or will that let the smoke out? >> I'm not sure if there's any ground reference on the device, and I don't >> have one to play with that isn't already on a tower. >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
