Our Baicells came with a Meanwell HEP-150-48A, which it turns out is
sold by Meanwell as an LED lighting power supply.
Any 48V supply should work. The Baicells spec sheet should show the
wattage requirement.
On 9/6/2018 8:15 PM, Mathew Howard wrote:
I could sell you one... I should have a pile of them somewhere around
the office. pretty much any 48 volt power supply will work fine. I
don't remember what the amp rating is on the Baicells power supply off
hand, but anything over 1 amp or so should be fine.
On Thu, Sep 6, 2018 at 6:00 PM Keith Fletcher
<[email protected] <mailto:[email protected]>>
wrote:
Looking for a BaiCells power supply for an enb 1W 3GHz Gen1
radio. Anyone have a link or part number for this?
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
