We generally go to Installation, Graphical Install on the left side frame menu (in the 650) and maximize that value, then start looking at other things.
-- Larry Smith [email protected] On Fri October 12 2018 08:34, Sam Lambie wrote: > The radios have an audio aiming tool as well but I have high tone hearing > loss so I can't hear a thing... So know which signal pevel to pay attention > to while aiming would be key. > > On Fri, Oct 12, 2018, 4:20 AM Lewis Bergman <[email protected]> wrote: > > I haven't put up a 650 but they always had an aiming mode to use for > > alignment. If you don't use that the nunnery will jump all over the place > > as you swing the antenna as the units try to optimize the link and data > > rates while you aim. > > Aiming mode locks this to a slow and single data rate and output so you > > can step through aligning everything with only your efforts as the single > > variable. > > > > On Thu, Oct 11, 2018, 11:05 PM Sam Lambie <[email protected]> wrote: > >> I am almost finished putting up at Cambium ptp650 and to finalize > >> installation, which recieve power do I use to aim these suckers? > >> -- > >> AF mailing list > >> [email protected] > >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > -- > > AF mailing list > > [email protected] > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
