We ground everything, From: AF <[email protected]> on behalf of SmarterBroadband <[email protected]> Reply-To: AnimalFarm Microwave Users Group <[email protected]> Date: Friday, October 26, 2018 at 4:12 PM To: 'AnimalFarm Microwave Users Group' <[email protected]> Subject: Re: [AFMUG] Eltek "J Series" -48v DC Power Systems
Do you leave the Eltek floating and ground everything after the RSDs? Do you connect the RSD input ground to the Eltek? From: AF [mailto:[email protected]] On Behalf Of Gino A. Villarini Sent: Friday, October 26, 2018 12:30 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] Eltek "J Series" -48v DC Power Systems We use tons of them.. big sites go with a Netonix IDC, smaller sites use 12 port Netonix + Meanwell RSD DC-DC For direct connect we use McCownTech APC/POE injectors From: AF <[email protected]<mailto:[email protected]>> on behalf of SmarterBroadband <[email protected]<mailto:[email protected]>> Reply-To: AnimalFarm Microwave Users Group <[email protected]<mailto:[email protected]>> Date: Friday, October 26, 2018 at 3:14 PM To: 'AnimalFarm Microwave Users Group' <[email protected]<mailto:[email protected]>> Subject: [AFMUG] Eltek "J Series" -48v DC Power Systems Thinking of using some of these to make DC sites. Eltek "J Series" -48v DC Power Systems Anyone using these? Care to share how you are wiring things as these are -48v. I plan to power; A Netonix switch (would I have to use the special -48v version?) for Cambium APs A Mikrotik CCR (see my other email) Telrad eNodeBs (these are -48) And a mid span injector to power backhauls. Any suggestions, diagrams, help gratefully appreciated? Adam
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
