We deliver DIA two ways. IP block routed to you. /31 between us and we route your IP block to your end. IP block on WAN. (used if they want to have all the IPs on the WAN of their firewall or EQ using a switch and routers)
We can also deliver multiple circuits over the same hardware, i.e with a siklu link. One port configured for one customers circuit, another port for another customers circuit. On Thu, Nov 1, 2018 at 12:55 PM Adam Moffett <[email protected]> wrote: > That's exactly what I would have said. Just ask for a /29 and don't > complicate the conversation. > If you want the other party to be able to open trouble tickets and/or > see invoices you can add them as an authorized contact on the account. > > > ------ Original Message ------ > From: "Ken Hohhof" <[email protected]> > To: "AnimalFarm Microwave Users Group" <[email protected]> > Sent: 11/1/2018 1:47:17 PM > Subject: Re: [AFMUG] Terminology for splitting a single Internet circuit > > >One common approach is to request a block of public IP addresses. For > >example, a "block of 5" which corresponds to a /29 block with 5 usable > >after > >deducting the network, broadcast, and gateway addresses. How this is > >done > >depends on the ISP and the technology. It might also be possible to > >just > >get a second public IP address, for example if the ISP uses PPPoE or > >DHCP > >with reservations, it could just hand out a second IP to the second > >device, > >without actually needing a routed block. You might need a switch ahead > >of > >the 2 routers, as you mentioned. In our case we would typically > >install a > >demarc router with several ports and you wouldn't need a switch. > > > >-----Original Message----- > >From: AF <[email protected]> On Behalf Of Lincoln (AFMUG Lists) > >Sent: Thursday, November 1, 2018 12:24 PM > >To: [email protected] > >Subject: [AFMUG] Terminology for splitting a single Internet circuit > > > >Hi; > > > >Is there a terminology that is used to request from an ISP where if you > >have > >a single circuit servicing a single client (or yourself), and now you > >want > >to provision it with two IPs to service two independent > >routers. But it's at the same physical location running of the same > >single physical circuit. > > > >For example: You are the WISP which originally setup a site for a > >single > >client, single IP, single SM (or circuit). Now you want to provision > >it > >like an MTU. But it is the same client. They only want another IP (or > >line) so that they can put a separate router on it. Almost like > >putting a > >switch in front of their current router and then each router plugs into > >that > >switch. > > > >Similarly, if you have a fiber circuit coming into the site, and now > >you > >want to achieve the same thing. Two routers running independently of > >that > >single fiber circuit. > > > >Is there a term or way that is simple to request this from yourselves > >as a > >WISP or if you requesting the same from one of your fiber providers > >would > >they be looking for? > > > > > >Lincoln > > > > > >-- > >AF mailing list > >[email protected] > >http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > > >-- > >AF mailing list > >[email protected] > >http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
