If you want decent audio quality I would go with a Barix
instreamer/extremer. I have used these for radio stations and other high
quality media streams.
https://www.barix.com/audio-products/instreamer-family/
On 11/7/2018 4:21 PM, Steve Jones wrote:
Ive got the perfect solution, but I cant find the notes. its exactly
what you need though. I will look
On Wed, Nov 7, 2018 at 10:18 AM Nate Burke <[email protected]
<mailto:[email protected]>> wrote:
I'm trying to get a monitor speaker off a mixing board to a different
part of a building. 100+ year old construction, a 20" thick brick
wall
between the mixing board and the endpoint, and a cable run of
probably
400-500' involving a lot of fishing of wires. I'm trying to come
up with
a way to avoid running wires if I can. Straight line distance between
the 2 points is about 150' WIFI is available at the sound board,
and a
hardline cat5 at the remote end, but I need something idiot proof
that
just turns on and works. One thought was maybe a SIP Setup (there is
already a SIP Pbx in place), some sort of ATA that would connected to
the monitor out of the board then could be dialed from another SIP
Extension? Not sure if such a beast exists.
I'd also be open to a simple wireless speaker, but would have to
be low
enough frequency to operate at distance through a couple walls, so
Bluetooth is probably out. Audio quality is a secondary concern,
it's
more of a "What's happening right now in the other room" need. Any of
you Pro Audio guys have any suggestions?
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Trey Scarborough
VP Engineering
3DS Communications LLC
p:9729741539
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
