Yes, will get back to you. From: Gino A. Villarini Sent: Tuesday, November 27, 2018 2:31 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Eltek Valere J series -48 or +48
Chuck, can you quote: Eltek Rectiverter Power Core 6 KVA 1ph ? Gino Villarini Founder/President @gvillarini t: 787.273.4143 m: www.aeronetpr.com | Metro Office Park #18 Suite 304 Guaynabo, PR 00968 From: AF <af-boun...@af.afmug.com> on behalf of Chuck McCown <ch...@wbmfg.com> Reply-To: AnimalFarm Microwave Users Group <af@af.afmug.com> Date: Monday, November 26, 2018 at 6:59 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Eltek Valere J series -48 or +48 I am an Eltek dealer. Low volume but I can probably get you a decent price. From: TJ Trout Sent: Monday, November 26, 2018 3:40 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Eltek Valere J series -48 or +48 I'm looking at the Valere series and I can't seem determine if it's +48 or -48, seems like it's +48 but I thought all the telecom stuff was positive ground. How do you go about powering negative ground loads from a positive ground power source? I'm assuming you can leave out the neutral and isolate the chassis? -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com