Can you post a pic of what you have so far? The hive mind might be able to help. Things like offsetting them at an angle help a lot.
On Sat, Oct 6, 2018 at 2:10 PM <[email protected]> wrote: > Making progress. Yes, quad/double couplers all seem to fit in the same > rectangular knock out hole. > But when making a prototype it is hard to plug and unplug the jumpers. I > made one that is three connector high so you can do 12 fibers if LC and 6 > if SC. But really hard to unplug the ones at the bottom of the stack. > > So, I think I will embed a magnet in the back of the enclosure so you can > pluck out the holder for the connectors and then you can pull on both the > connector and the jumper with both hands. I think this is going to be > better than just yanking on a jumper in the bottom of the box. > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
