I think the ones you're thinking about have "BCM" in the model number
(for Battery Charge Monitor or something like that).
Most of the ones I know about are made by Altech or Phoenix Contact, or
a few others.
Finding one that works for 12VDC is a bit of an odd duck; we are almost
always looking for 24VDC or 48VDC. I did a little poking around and
found this one from Altech that does 12VDC. Key thing to look for is "DC
UPS".
https://www.alliedelec.com/altech-corp-cbi123a/70236424/
bp
<part15sbs{at}gmail{dot}com>
On 12/27/2018 4:35 PM, [email protected] wrote:
I know it has been mentioned many times before, but I cannot remember
if it is a Meanwell product or not.
In my splicing trailer, I have a nice 12 volt DC fuse panel in
addition to the 120/240 panel.
The 12 volts runs LED overhead interior lights, porch light, furnace
(I bought the one Bill recommended) and the trailer break-away brake
circuit.
I want a DIN rail mount charger rectifier.
I believe there is one that has charging terminals that limit battery
charging current as well as load terminals that are not limited.
Seems like there was a BC in the part number. Too lazy to try to
figure out the archive.
And I don’t recall any specific keyword stuff to make the search easy.
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
