Yep, that is what I am looking for, but it sure isn’t cheap is it. From: Bill Prince Sent: Thursday, December 27, 2018 7:51 PM To: AnimalFarm Microwave Users Group ; [email protected] Subject: Re: [AFMUG] Battery charger + load
I think the ones you're thinking about have "BCM" in the model number (for Battery Charge Monitor or something like that). Most of the ones I know about are made by Altech or Phoenix Contact, or a few others. Finding one that works for 12VDC is a bit of an odd duck; we are almost always looking for 24VDC or 48VDC. I did a little poking around and found this one from Altech that does 12VDC. Key thing to look for is "DC UPS". https://www.alliedelec.com/altech-corp-cbi123a/70236424/ bp <part15sbs{at}gmail{dot}com> On 12/27/2018 4:35 PM, [email protected] wrote: I know it has been mentioned many times before, but I cannot remember if it is a Meanwell product or not. In my splicing trailer, I have a nice 12 volt DC fuse panel in addition to the 120/240 panel. The 12 volts runs LED overhead interior lights, porch light, furnace (I bought the one Bill recommended) and the trailer break-away brake circuit. I want a DIN rail mount charger rectifier. I believe there is one that has charging terminals that limit battery charging current as well as load terminals that are not limited. Seems like there was a BC in the part number. Too lazy to try to figure out the archive. And I don’t recall any specific keyword stuff to make the search easy.
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
