I ran into one production facility that was out of power in an industrial area of town. The power company could not easily upgrade them for less than a huge fortune. A local company came in and did some harmonic filter magic and now there was more power available for more machines. I think it also helped their power bill.
From: Jaime Solorza Sent: Saturday, January 19, 2019 1:58 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] SCADA porn Ha... client is El Paso Electric at Newman power plant...I doubt they really care...these are for the ponds between plant and largest solar farm in area..the ponds are designed to keep the water from seeping into ground water. On Sat, Jan 19, 2019, 4:26 AM Lewis Bergman <[email protected] wrote: I agree. Cleaning up power I can understand but facing money? You are paying for watts so you are just losing money on the inefficiency of the transformer. On Tue, Jan 15, 2019, 5:12 PM Ken Hohhof <[email protected]> wrote: A Google search comes up with a device from Legend Power Systems that is basically a step down transformer, claiming that by reducing the AC voltage you will save power. That sounds like B.S. to me, unless all your loads are incandescent light bulbs. From: AF <[email protected]> On Behalf Of Jaime Solorza Sent: Tuesday, January 15, 2019 1:47 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] SCADA porn Yes...keeps power clean... On Tue, Jan 15, 2019, 12:32 PM <[email protected] wrote: What does a harmonizer do? Cut down on harmonics? I know that in some situation harmonics can cause a power factor type of problem to the power company. From: Jaime Solorza Sent: Tuesday, January 15, 2019 12:27 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] SCADA porn Yes...outer seal is bonded to ground inside pipe....first time we have done it this way...this enclosure has compenents we have never installed before like a harmonizer. On Tue, Jan 15, 2019, 7:09 AM dave <[email protected] wrote: what is that ground for?? Looks like a ground to an outer seal of some sort. On 1/14/19 8:36 PM, Jaime Solorza wrote: Thanks. First time using the new Phoenix Contact managed switch...will share experience once we get things going... Some extra grounding was called for as per engineers... On Mon, Jan 14, 2019, 4:53 PM David M <[email protected] wrote: I finally got a good source for most of the interconnects,din rail and wire management stuff. I always like good clean boxes.. Awesome! On 1/14/2019 3:41 PM, Jaime Solorza wrote: Starting year off busy... -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
