Can you share the contact for the consultant for notes? On Tue, Jan 29, 2019 at 11:39 AM Sam Lambie <[email protected]> wrote:
> Thanks David. I really appreciate it. > Setting up a group... > What do you use for Pattern and Value? The Docs of course aren't that > useful for the Cambium gear. > > On Mon, Jan 28, 2019 at 8:36 PM David Coudron < > [email protected]> wrote: > >> Hi Sam, >> >> >> >> We are still learning, but are pretty optimistic about what we’ll be able >> to do with this system. >> >> >> >> 1. Yes, that is the OID of the Downlink frame utilization from our >> other monitoring system. I haven’t tested it out yet, but a similar rule >> is working for our Tycon TPDIN MonitorWebs. >> 2. The Map To: is a Device Group that we set up and auto pulled the >> Cambium APs into it. That way the rule is applied to all Cambium APs by >> default. >> >> >> >> Feel free to keep in touch, we are just getting our feet wet and I am >> guessing we’ll have questions too. I did find a consultant who specializes >> in LibreNMS. Seems like he knows his stuff. I had him write us a >> special, calculated value based on 5 different OIDs. That thing is going >> to be a life saver. >> >> >> >> Thanks, >> >> >> >> *David Coudron* >> >> [email protected] | *Mobile: *612-991-7474 >> >> >> >> *Advantenon, Inc. * >> >> [email protected] | 3500 Vicksburg Lane N, Suite 315, Plymouth, MN >> 55447 | www.advantenon.com | *Phone:* 800-704-4720 | *Local: * >> 612-454-1545 >> >> >> >> [image: cid:[email protected]] >> >> >> >> *From:* AF <[email protected]> *On Behalf Of * Sam Lambie >> *Sent:* Monday, January 28, 2019 9:10 PM >> *To:* AnimalFarm Microwave Users Group <[email protected]> >> *Subject:* Re: [AFMUG] LibreNMS Alerts >> >> >> >> David, >> >> >> >> Thank you Sir! A couple of questions if you have a moment. Is that the >> entire MIB in the second field for frame utilization? >> >> And Under Map To: You have a field labeled Cambium AP. What does that do? >> >> I might have more questions! >> >> >> >> Sam >> >> >> >> On Mon, Jan 28, 2019 at 6:52 PM David Coudron < >> [email protected]> wrote: >> >> Sam, >> >> >> >> I am far from an expert, but we do have a few alerts working in >> LibreNMS. If you are doing frame utilization, I am guessing this is on >> Cambium AP? If so, we are just messing around setting this up. I think >> this one will work: >> >> >> >> Regards, >> >> >> >> *David Coudron* >> >> >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *Sam Lambie >> *Sent:* Monday, January 28, 2019 4:22 PM >> *To:* AnimalFarm Microwave Users Group <[email protected]> >> *Subject:* [AFMUG] LibreNMS Alerts >> >> >> >> Ok, >> >> I have been diving deep into this and am at a wall. I want to have LNMS >> alert me when ANY of my AP's have a frame/downlink utilization go above 90% >> >> >> >> Under Alerts Rule, is access_points.radioutil the correct one to choose? >> Are there templates for alerts and graphs that anyone wants to share with >> me? >> >> >> >> Thanks >> >> Sam >> >> >> >> -- >> >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> >> >> -- >> >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
