Hi Sam, Here is what we used for Tycon and Netonix and Mimosa equipment. However, the same thing is not working for Cambium groups. I have they guy looking into that. [cid:[email protected]]
I should have an answer by end of day tomorrow why it won’t pull the OS value from Cambium radios like it does with the other manufacturers. Regards, David Coudron From: AF <[email protected]> On Behalf Of Sam Lambie Sent: Tuesday, January 29, 2019 11:38 AM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] LibreNMS Alerts Thanks David. I really appreciate it. Setting up a group... What do you use for Pattern and Value? The Docs of course aren't that useful for the Cambium gear. On Mon, Jan 28, 2019 at 8:36 PM David Coudron <[email protected]<mailto:[email protected]>> wrote: Hi Sam, We are still learning, but are pretty optimistic about what we’ll be able to do with this system. 1. Yes, that is the OID of the Downlink frame utilization from our other monitoring system. I haven’t tested it out yet, but a similar rule is working for our Tycon TPDIN MonitorWebs. 2. The Map To: is a Device Group that we set up and auto pulled the Cambium APs into it. That way the rule is applied to all Cambium APs by default. Feel free to keep in touch, we are just getting our feet wet and I am guessing we’ll have questions too. I did find a consultant who specializes in LibreNMS. Seems like he knows his stuff. I had him write us a special, calculated value based on 5 different OIDs. That thing is going to be a life saver. Thanks, David Coudron [email protected]<mailto:[email protected]> | Mobile: 612-991-7474 Advantenon, Inc. [email protected]<mailto:[email protected]> | 3500 Vicksburg Lane N, Suite 315, Plymouth, MN 55447 | www.advantenon.com<http://www.advantenon.com/> | Phone: 800-704-4720 | Local: 612-454-1545 [cid:[email protected]] From: AF <[email protected]<mailto:[email protected]>> On Behalf Of Sam Lambie Sent: Monday, January 28, 2019 9:10 PM To: AnimalFarm Microwave Users Group <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] LibreNMS Alerts David, Thank you Sir! A couple of questions if you have a moment. Is that the entire MIB in the second field for frame utilization? And Under Map To: You have a field labeled Cambium AP. What does that do? I might have more questions! Sam On Mon, Jan 28, 2019 at 6:52 PM David Coudron <[email protected]<mailto:[email protected]>> wrote: Sam, I am far from an expert, but we do have a few alerts working in LibreNMS. If you are doing frame utilization, I am guessing this is on Cambium AP? If so, we are just messing around setting this up. I think this one will work: [cid:[email protected]] Regards, David Coudron From: AF <[email protected]<mailto:[email protected]>> On Behalf Of Sam Lambie Sent: Monday, January 28, 2019 4:22 PM To: AnimalFarm Microwave Users Group <[email protected]<mailto:[email protected]>> Subject: [AFMUG] LibreNMS Alerts Ok, I have been diving deep into this and am at a wall. I want to have LNMS alert me when ANY of my AP's have a frame/downlink utilization go above 90% Under Alerts Rule, is access_points.radioutil the correct one to choose? Are there templates for alerts and graphs that anyone wants to share with me? Thanks Sam -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com<http://www.newmex.com> -- AF mailing list [email protected]<mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com<http://www.newmex.com> -- AF mailing list [email protected]<mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com<http://www.newmex.com>
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
