0 problems with epmp at full load. 30 megs or more. Full downlink%. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Mon, Feb 4, 2019 at 9:32 PM Nate Burke <n...@blastcomm.com> wrote: > Yea this is just straight MRTG doing 5 minute polling. It does seem to > happen more on our older sites, which would be Gen1 EPMP1000. > > On 2/4/2019 6:45 PM, Mathew Howard wrote: > > I haven't seen anything like that, but I think we're only using something > like 5 minute intervals with SNMP on ours... I suppose it might have issues > with more frequent checks. > > On Mon, Feb 4, 2019 at 6:42 PM Josh Baird <joshba...@gmail.com> wrote: > >> Not having this issue. >> >> Sent from my iPhone >> >> > On Feb 4, 2019, at 3:48 PM, Nate Burke <n...@blastcomm.com> wrote: >> > >> > I can't remember if this was discussed before or not. When an EPMP >> goes under load, like ~30mb or so, does it stop responding to SNMP? Across >> my network EPMP 1000's with Sync will start missing reads if the throughput >> goes above like 30mb/s Everything is on 3.5.1. I don't see anything like >> this with SNMP addressed in the release notes through 3.5.5. Am I the only >> one having this problem? ICMP to the AP, and traffic through the AP is >> unaffected. >> > >> > -- >> > AF mailing list >> > AF@af.afmug.com >> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com