I would argue that our CAT6 gas tube versions add about the equivalent of a
foot of CAT5 capacitance.
There is no argument that in some cases it causes problems. But we sell tens
of thousands of these things each year and we hear of one or two instances like
this each year.
In my opinion there must be other contributing factors. But lets see what the
list thinks.
From: Keefe John
Sent: Friday, April 12, 2019 8:37 AM
To: Chuck McCown
Subject: Re: Voltage Drop on Surges
mimosa says You can use it for our radios to get protection on them but
sometimes it can cause Port Flapping between 1000baseT and 100BaseT because of
the additional capacitance it adds on the line between PoE and radio
Keefe John
CEO
Ethoplex
Direct: 262.345.5200
--------------------
Ethoplex Business Internet
http://www.ethoplex.com/
Signal Residential Internet
http://www.signalisp.com/
https://www.linkedin.com/in/keefejohn/
On Fri, Apr 12, 2019 at 9:15 AM Keefe John <[email protected]> wrote:
Why do people keep saying using surges on the top and bottom of a tower
causes connectivity issues? Like dropping from 1gbps to 100 mbps?
How does your stuff work with Mimosa?
Keefe John
CEO
Ethoplex
Direct: 262.345.5200
--------------------
Ethoplex Business Internet
http://www.ethoplex.com/
Signal Residential Internet
http://www.signalisp.com/
https://www.linkedin.com/in/keefejohn/
On Fri, Apr 12, 2019 at 9:09 AM Chuck McCown <[email protected]> wrote:
Zero on surge suppressors. Fused have a very low resistance, I would have
to look it up, but the voltage drop would depend on current.
Sent from my iPhone
On Apr 12, 2019, at 8:06 AM, Keefe John <[email protected]> wrote:
What's your insertion voltage loss on your POE fuses and surge
supressors?
Keefe John
CEO
Ethoplex
Direct: 262.345.5200
--------------------
Ethoplex Business Internet
http://www.ethoplex.com/
Signal Residential Internet
http://www.signalisp.com/
https://www.linkedin.com/in/keefejohn/--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
