For you guys that are utilizing these, do you normally do a 48V and a 24V volt power supply for mixed sites? Or do you do what I think I saw Ken mentioned before - 48 to 24V converter for the few devices that may require 24v?
On Tue, Apr 16, 2019 at 10:21 AM Sam Lambie <samtaos...@gmail.com> wrote: > I have been using both of those same models with PF gear for a long time. > never had an issue with them. > > On Tue, Apr 9, 2019 at 2:51 PM Brandon Yuchasz <li...@gogebicrange.net> > wrote: > >> Last night I replaced yet another Amazon special 29.5V power supply that >> was feeding out packetflux equipment. These are defiantly a weak link and >> something I need to pull out of the field and replace. >> >> I spent some time today digging into the MeanWell product line and came >> up with two options to power our original Packetflux sites along with the >> ones now running the rack injectors. >> >> >> >> I need but 28V DC and 48V DC at sites feed from 120VAC >> >> >> >> I am considering going with the Mean Well NDR 120-24 and Mean Well NDR >> 120-48 units. Does anyone have experience with these good or bad? Just >> looking for something that more stable and reliable at this point. >> >> >> >> Thanks, >> >> Brandon >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com