It's when you hit the house with an aerial, then you have to run down
the wall to the NID. Would you use U-channel in that case? Do you
still need hangers for the U-channel or does it have a mounting flange
built in?
I understand why the drop cable has to be so ridgid, but I am annoyed
sometimes that you can't turn a sharp corner with a drop cable. You
almost have to have the NID directly under the attachment point on the
house, or be ok with making a huge turn or a loop where you change
directions.
-Adam
On 5/10/2019 9:25 AM, Chris Fabien wrote:
Those metal clips work well but I don't like running flat fiber drop
along a wall. Sure doesn't like to bend and lay flat so you're
limited to going up the wall or I suppose across it. We tend to cover
with conduit or U-channel where it has to be attached to a wall.
On Sun, May 5, 2019 at 4:05 PM Jason McKemie
<[email protected]
<mailto:[email protected]>> wrote:
That would be too big for standard flat drop cable.
On Sunday, May 5, 2019, Ken Hohhof <[email protected]
<mailto:[email protected]>> wrote:
What are the dimensions of your flat drop cable? They make
flexclips for dual RG6, would that be too big?
*From:*AF <[email protected]
<mailto:[email protected]>> *On Behalf Of *Adam Moffett
*Sent:* Sunday, May 5, 2019 10:41 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Flat drop clamp/hanger
I wouldn't mind having a plastic version of the same clip. I
like flexclips, I just don't see a version for flat drop.
On 5/3/2019 4:00 PM, Chuck McCown wrote:
And most of them are non metallic and round.
Sent from my iPhone
On May 3, 2019, at 1:26 PM, Carl Peterson
<[email protected]
<mailto:[email protected]>> wrote:
That is for flat drop. Why would you use it for
ethernet? There are a million similar clips for
ethernet that work fine.
On Fri, May 3, 2019 at 1:58 PM Robert Andrews
<[email protected]
<mailto:[email protected]>> wrote:
Would there be any worries of causing coupling
across the wires for
using this for long runs of Ethernet?
On 05/03/2019 11:29 AM, Adam Moffett wrote:
> Perfect.
> I searched that site for "drop cable hanger",
"drop cable strap", etc;
> and I came up with dozens of things that were
not what I needed. Thank you.
> -Adam
>
>
> On 5/3/2019 1:34 PM, Erich Kaiser wrote:
>>
https://www.linemen-tools.com/ProductDetails.asp?ProductCode=H-9086
>>
>>
>>
>>
>>
>>
>> On Fri, May 3, 2019 at 11:05 AM Adam Moffett
<[email protected] <mailto:[email protected]>
>> <mailto:[email protected]
<mailto:[email protected]>>> wrote:
>>
>> If you run flat drop cable along a wall,
what kind of hardware do you
>> secure it with?
>> Is there something as simple as the single
screw black flex clip, but
>> made for flat drop cable?
>>
>> I've been putting in a flex clip and then
zip tieing to the flex
>> clip.
>> I realized today that this is stupid and
there must be a better way.
>>
>> Thanks,
>> Adam
>>
>>
>> --
>> AF mailing list
>> [email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>
>>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>>
>
>
>
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Carl Peterson
*PORT NETWORKS*
401 E Pratt St, Ste 2553
<https://maps.google.com/?q=401+E+Pratt+St,+Ste+2553+Baltimore,+MD+21202&entry=gmail&source=g>
Baltimore, MD 21202
<https://maps.google.com/?q=401+E+Pratt+St,+Ste+2553+Baltimore,+MD+21202&entry=gmail&source=g>
(410) 637-3707
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
