Thanks
From: Mark Radabaugh
Sent: Tuesday, June 18, 2019 2:27 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] GPON and DWDM on same fiber?
Hum.. I see we have documentation of where we drop it off the fiber:
But no pretty picture of how we put it on the fiber. It’s similar - I’ll have
it drawn up tomorrow. It’s all Fiberstore passive gear.
Mark
On Jun 18, 2019, at 3:34 PM, Chuck McCown <ch...@wbmfg.com> wrote:
Could you make us a simple line drawing showing how it works please?
-----Original Message----- From: Mark Radabaugh
Sent: Tuesday, June 18, 2019 12:29 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] GPON and DWDM on same fiber?
Yes, we have it working.
Mark
On Jun 18, 2019, at 10:35 AM, Adam Moffett <dmmoff...@gmail.com> wrote:
Can I run GPON on the same fiber with a WDM MUX? It looks like the GPON
wavelengths are above and below the DWDM channels, so I'm imagining it would
work, but I don't know jack about jack.
-Adam
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
