Just buy batts that you want to transition to as other cells die. It will
take some wiring cobbling.
-----Original Message-----
From: Mark - Myakka Technologies
Sent: Tuesday, July 2, 2019 3:27 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] 12A100FT Battery
Chuck,
I'm kind of leaning that way, but not sure I can find the same
configuration. The 12A100FT I currently have has the terminals on the
front face of the battery. Everything I've found so far has had the
terminals on top front. May end up getting 4 new ones. Put some
feelers out there to my normal vendors to see what they have.
--
Best regards,
Mark mailto:[email protected]
Myakka Technologies, Inc.
www.Myakka.com
------
Tuesday, July 2, 2019, 5:17:56 PM, you wrote:
cwc> I have had good luck in replacing just the bad battery.
cwc> -----Original Message-----
cwc> From: Mark - Myakka Technologies
cwc> Sent: Tuesday, July 2, 2019 1:28 PM
cwc> To: 'AnimalFarm Microwave Users Group'
cwc> Subject: [AFMUG] 12A100FT Battery
cwc> I have a -48vdc power plant that uses 4 of these batteries.. One of
cwc> them has gone bad. I took them out of series for testing and have
cwc> ID'd the bad battery. These are 8 year old batteries. Just wondering
cwc> if I should replace all 4 at over $400 each or just replace the one
cwc> for now.
cwc> Thoughts?
cwc> --
cwc> Thanks,
cwc> Mark mailto:[email protected]
cwc> Myakka Technologies, Inc.
cwc> www.Myakka.com
cwc> --
cwc> AF mailing list
cwc> [email protected]
cwc> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
