Awesome. Thanks Sent from my iPhone
> On Aug 26, 2019, at 22:07, Edward H. Winters <[email protected]> wrote: > > A pneumatic drill to make the holes; > https://www.atlascopco.com/en-us/construction-equipment/products/handheld/rock-drills/pneumatic-rock-drills/BBD15ET > > Then pipe and a funnel to get the stuff down in the holes. > > > > On 8/26/19 8:39 PM, Craig House wrote: > > That’s cool I didn’t know such a thing existed. But that poses another > > problem how do I get it into the rock that I want to demolish that is 7 > > feet down in an 18 inch diameter hole. Oh the logistics fun I run into > > > > Sent from my iPhone > > > >> On Aug 26, 2019, at 21:36, Edward H. Winters <[email protected]> wrote: > >> > >> Then use a non explosive demolition agent. > >> > >> https://en.wikipedia.org/wiki/Non-explosive_demolition_agents > >> https://www.dexpan.com/ > >> > >> > >> On 8/24/19 3:09 PM, Craig House wrote: > >>> Not sure blasting is an option. It is 3' from the customers house > >>> > >>> > >>> ----- Original Message ----- > >>> From: "Chuck McCown" <[email protected]> > >>> To: "AnimalFarm Microwave Users Group" <[email protected]> > >>> Sent: Saturday, August 24, 2019 4:07:44 PM > >>> Subject: Re: [AFMUG] Rock coring question > >>> > >>> Drill and blast. > >>> > >>> Sent from my iPhone > >>> > >>>> On Aug 24, 2019, at 2:44 PM, Craig House <[email protected]> > >>>> wrote: > >>>> > >>>> We are setting 60’ utility poles for customers and bought our own auger > >>>> truck and core barrel to do the work. It all has been going well up > >>>> until yesterday. We don’t have use The core barrel very often. Most of > >>>> the time the core comes out after you get it cut. However yesterday, we > >>>> cored down to the depth we needed but the rock core did not break off to > >>>> pull it out of the hole. Has anyone out there had any experience with > >>>> something like this what is the next step to get the core to break out? > >>>> Normally we wiggle the barrel around a little bit and the core comes > >>>> right out. In this case it will not break loose. > >>>> > >>>> Sent from my iPhone > >>>> -- > >>>> AF mailing list > >>>> [email protected] > >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >>> > >> > >> -- > >> AF mailing list > >> [email protected] > >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
