SM's. But thinking about it doesn't sound like a very reliable solution. Better off just swapping power supplies IMO
On Wed, Jan 22, 2020 at 2:57 PM Ken Hohhof <[email protected]> wrote: > Is this an AP or an SM? > > > > *From:* AF <[email protected]> *On Behalf Of *Mathew Howard > *Sent:* Wednesday, January 22, 2020 11:26 AM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] Canopy POE Conversion > > > > Tycon does make some stuff that would probably work, but you'd have to > come up with an outdoor box to put it in. > > > > But I agree with Chuck... changing the PS seems a lot more practical. > > > > On Wed, Jan 22, 2020 at 10:54 AM Adam Moffett <[email protected]> wrote: > > I'm pretty sure 450i will run on 802.3at if that helps any. Tycon seems > to make anything to anything PoE adapters, but not for outdoor. > > On 1/22/2020 11:52 AM, [email protected] wrote: > > Sure seems easier to swap the PS when swapping the radio. > > -----Original Message----- From: Matt Sent: Wednesday, January 22, > > 2020 9:41 AM To: [email protected] Subject: [AFMUG] Canopy POE Conversion > > Does anyone know of an outdoor device to take a Canopy 24 volt POE > > source and convert it too Canopy 48 volt POE? > > > > I have a PMP450 I want to swap for a PMP450i without swapping POE > > power source in a pinch. > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
