They posted an online course, I need to go check if it's the same thing. Trying to do about 10 CBRS related things in parallel here.
I doubt the online course has sandwiches though. BYOS. ---- Original Message ---- From: "Steve Jones" [email protected] Sent: 1/30/2020 3:46:08 PM To: "AnimalFarm Microwave Users Group" [email protected] Subject: Re: [AFMUG] CBRS SAS options from Cambium tell cambium matt to do another CBRS session get pitchforks and torches and go to his office Im telling you guys, its good stuff On Thu, Jan 30, 2020 at 2:24 PM Mark Radabaugh [email protected] wrote: yes. As long as the SM can hear (and is set to listen to the frequency, bandwidth, and color code) it will work. Mark On Jan 30, 2020, at 2:49 PM, Josh Luthman [email protected] wrote: Will the SM scan for CBRS and NN mode with one driver loaded? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jan 30, 2020 at 2:48 PM Mark Radabaugh [email protected] wrote: One very nice feature of the Cambium solution is (with some caveats) you can just turn off CBRS mode in the AP and all the SMs go back to normal NN licensed operation. The caveats: You have to have the frequencies, channel widths, color codes, etc. enabled in the SMs for them to be able to see the AP when it comes up in legacy NN modes. Obviously the frequencies need to be in 3650-3700 and with appropriate power levels set. Im told you may need to toggle the AP in/out of CBRS and extra time in cnMaestro but that appears to be something we have only seen a few times so far when transitioning in/out of CBRS modes. Mark On Jan 30, 2020, at 2:21 PM, Ken Hohhof [email protected] wrote: I see theres a beta 4 release today. Havent read the release notes yet. From: AF [email protected] On Behalf Of Sean Heskett Sent: Thursday, January 30, 2020 12:24 PM To: AnimalFarm Microwave Users Group [email protected] Subject: Re: [AFMUG] CBRS SAS options from Cambium We also found a big with one Medusa AP that wouldnt get sync even tho the sync status showed cambium sync and timing port sync. Solution was to turn on auto-sync + free-run and then also enable free run before gps sync still working with cambium on a better fix but its working for now. On Thu, Jan 30, 2020 at 10:54 AM Mark Radabaugh [email protected] wrote: It has bugs, thats for sure - but its workable. Turn off spectrum scan on startup if you enable CBSD. It goes into an endless loop in this beta. Thats probably the worst bug we have found. Mark Mark Radabaugh Amplex 22690 Pemberville Rd Luckey, OH 43443 419-261-5996 On Jan 30, 2020, at 12:15 PM, Ken Hohhof [email protected] wrote: ? Mark, how worried are you about the 450 firmware still being beta? From: AF [email protected] On Behalf Of Mark Radabaugh Sent: Thursday, January 30, 2020 10:35 AM To: AnimalFarm Microwave Users Group [email protected] Subject: Re: [AFMUG] CBRS SAS options from Cambium We have it up and running happily. Just converted this site today: image001.png You can pick the SAS you want to use with cnMaestro but the default option is Federated, but they will let you work with the other SAS vendors if you prefer. You have to use cnMaestro (either on or off premise) to serve as the proxy to communicate with the SAS - thats just part of how the system works. If Cambium support isnt working with you on it contact your regional Cambium sales manager. If that doesnt work its not too hard to find your way up the Cambium organization until you get results. https://www.cambiumnetworks.com/our-company/executive-team/ is the list. Cambium follows the [email protected] for email addresses. Start with the CSM and escalate as needed. Mark On Jan 30, 2020, at 11:25 AM, David Coudron [email protected] wrote: Interested to know what folks are doing or planning to do who have Cambium PMP 450 3.65 equipment in the field. It is our understanding that Cambium is the only SAS option we have due to the need to have cnMaestro be the Domain Proxy for the SAS. Has anyone got this up and working? We have been requesting access to the CBRS options in cnMaestro for two weeks but are not making much progress. With full commercial availability, we are a little surprised that this isnt available. Are there other options for connecting to a SAS other than using Cambium as the SAS Domain Proxy? Seems they might not be ready for this, or are not heavily committed to it. Regards, David Coudron -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com-- AF mailing [email protected]http://af.afmug.com/mailman/listinfo/af_af.afmug.com-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
