Does anyone have recommendations for a light weight pulley?
Mark Radabaugh wrote:
I would actually go lower diameter at 3/8” Unless you are pulling
up the tower itself 5000’ is plenty strong and considerably lighter
than the 1/2” or the 5/8”.
The one you linked to is a good rope. I think we have the 3/8” as
our main haul line.
We have heavier 1/2" and 5/8” ropes for climbing ropes.
Mark
On Apr 6, 2020, at 8:39 PM, Tushar Patel <[email protected]
<mailto:[email protected]>> wrote:
I am in the market to buy 1200 ft long double braid rope for pulling
a load up the tower using capstan etc.
Any suggestions on the brand and the size (1/2 or 5/8)?
Following?
https://www.gmesupply.com/lifting-rigging/pelican-load-pro-double-braid-rope
Thanks,
Tushar
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
*Jay Weekley*
*Cyber Broadband
*
--
This email has been checked for viruses by AVG.
https://www.avg.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
