Supposedly the realflex drop cables can be treated like cat5. We're a little more gentle then that with the 3mm ones. You can order in just about any config. i.e plenum, one end terminated, both ends terminated, pull sock on one end, etc.
On Thu, Jun 4, 2020 at 11:10 AM Carl Peterson <[email protected]> wrote: > Cheap would be the bow type flat drop - we use them with FRP steel ones > are too stiff. > > Next option would be either 3m of 4.8mm RBR drop cables like > MDC-JJ1G-0200FJ > > On Thu, Jun 4, 2020 at 10:25 AM <[email protected]> wrote: > >> I am planning to run the fiber clear into the 844G router at each home. >> But in the past when we have done this, we have had issues with people >> not understanding that the fiber is a bit more delicate than cat5. Then >> there is the issue with the termination. You can get long jumpers and >> splice outside in a small enclosure. But replacing the end on the router >> is a bit more difficult. I have used unicams in the past, but with my new >> system I am looking for something better. >> >> I really need something a bit tougher than jumpers to route through the >> house. Anything like that exist? >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
