Thank you. On Fri, Jun 5, 2020 at 2:16 PM Chris Fabien <[email protected]> wrote:
> 444401UR43F050F > Graybar normally has these and then 100F version in stock. > > On Fri, Jun 5, 2020 at 1:35 PM Jason McKemie < > [email protected]> wrote: > >> Do you have a part number for the Corning assembly? I can't seem to >> locate it. >> >> On Thu, Jun 4, 2020 at 11:23 AM Chris Fabien <[email protected]> wrote: >> >>> We use one of two options >>> >>> Corning RuggedDrop assembly, is a 5mm 1F tight buffered cable with >>> SC/APC on either end, outside rated in case you need to house wrap, we use >>> this from the NID to a baseboard jack. These are $25-35 range for 50-100ft >>> length. >>> >>> Fiberstore armored patch cables - 3mm with a blue PVC jacket, we use >>> these from the baseboard jack to the modem/ONU. Depending on the ONU you >>> may need a UPC to APC which is a custom item about a 1 month lead time. >>> We've also bought a similar cable from total cable solutions. About $5 for >>> the FS and only about $8.50 for the TCS. We have also bought longer ones >>> of these to use from NID to the baseboard jack, in cases when it will not >>> be exposed to UV, like right into the crawl space and then up into the >>> living area. >>> >>> This is the baseboard jack we use: >>> http://www.ecablemart.com/terminal_box/2-fiber-86-type-ftth-terminal-box-p-119819.html >>> >>> Hope the helps >>> Chris >>> >>> >>> >>> On Thu, Jun 4, 2020 at 11:25 AM <[email protected]> wrote: >>> >>>> I am planning to run the fiber clear into the 844G router at each >>>> home. >>>> But in the past when we have done this, we have had issues with people >>>> not understanding that the fiber is a bit more delicate than cat5. Then >>>> there is the issue with the termination. You can get long jumpers and >>>> splice outside in a small enclosure. But replacing the end on the router >>>> is a bit more difficult. I have used unicams in the past, but with my new >>>> system I am looking for something better. >>>> >>>> I really need something a bit tougher than jumpers to route through the >>>> house. Anything like that exist? >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
