These were new out of the box. They spun freely, I just had to tighten it up so much to get the vertical adjustment to lock that it bent the thread.
On Tuesday, October 27, 2020, Ken Hohhof <[email protected]> wrote: > Sounds like maybe seizing / galling / cold welding of the stainless steel > bolt and nut. The anti-seize with the silver flecks in it is messy but > does work. Or replace the nuts with brass or silicon-bronze. > > > > *From:* AF <[email protected]> *On Behalf Of *Jason McKemie > *Sent:* Tuesday, October 27, 2020 4:33 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] Ubiquiti AF 60G > > > > Yes. > > > > On Tue, Oct 27, 2020 at 4:03 PM Ken Hohhof <[email protected]> wrote: > > Stainless steel U-bolt and nuts? > > > > *From:* AF <[email protected]> *On Behalf Of *Jason McKemie > *Sent:* Tuesday, October 27, 2020 3:40 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] Ubiquiti AF 60G > > > > Ha, no, plenty of threat left. It was at the upper end of what the u-bolt > would fit around. > > On Tuesday, October 27, 2020, Carl Peterson <[email protected]> > wrote: > > > > Was your pipe too small? > > Thats what she said > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
