You could add a reversing switch to the motor itself. A small box with a toggle switch. Does it have brushes? If so just a reversing switch on either the field or armature will do the trick. 4 wires.
From: AF [mailto:[email protected]] On Behalf Of Matt Hopkins Sent: Monday, December 7, 2020 3:27 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] Capstan Winch No can do on this one. The AC feed goes into the pedal first and then on to the winch. The pedal is basically a light switch. On Mon, Dec 7, 2020 at 1:10 PM Steve Jones <[email protected] <mailto:[email protected]> > wrote: can you swap pedals? its normally just a polarity reverse int he pedal On Mon, Dec 7, 2020 at 2:11 PM Matt Hopkins <[email protected] <mailto:[email protected]> > wrote: I just bought a new winch (https://www.gmesupply.com/ab-chance-3000-lb-capacity-capstan-hoist) for tower work but to my surprise it does not have reverse, and it's painfully slow. Our old My-Te had reverse, (https://myte.com/winch-hoist-models/product/300AB/?categories=3) I just thought it was a standard thing. It is really handy for lowering loads and getting them in just the right position. Our My-Te winch is 15 years old and has certainly paid for itself but it is due to be replaced. I would just get another My-Te but I would like a smidge more load capacity. What winch do you use? Any recommendations? -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
