Is that a single number, or 14 of them?
From: AF <[email protected]> On Behalf Of Sean Heskett Sent: Sunday, December 13, 2020 9:40 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] graphing 450m frame utilization You want to graph sector utilization instead. I don’t know the odi tho Basically what you are seeing is that SU-MIMO maxes out when MU-MIMO takes over and starts talking to multiple SMs. -Sean On Sun, Dec 13, 2020 at 8:23 PM Ken Hohhof <[email protected] <mailto:[email protected]> > wrote: Anybody know the secret to checking or graphing frame utilization on a Cambium 450m AP? The OID I am using is: 1.3.6.1.4.1.161.19.3.1.12.2.1.0 That works reliably on a regular 450i AP, but seems to be way pessimistic on a 450m. I will see the graph peg at 100%, but then an hour or two later the traffic graph will be double, so it seems like the AP wasn’t even close to maxed out. I’m not sure what’s going on, perhaps the SMs with low modulation are maxing out but the AP can still send lots more data to the SMs with good modulation and that make use of MU-MIMO? Like screw you bad boys, Santa’s going to give more presents to the good boys. Is there another OID I should be using? -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Sean Heskett ZIRKEL Internet • WiFi • Phone • TV 970-871-8500 x100 - Office
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
