I couldn't imagine trying to monitor that with powercode On Sun, Dec 13, 2020, 9:47 PM Ken Hohhof <[email protected]> wrote:
> Is that a single number, or 14 of them? > > > > *From:* AF <[email protected]> *On Behalf Of *Sean Heskett > *Sent:* Sunday, December 13, 2020 9:40 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] graphing 450m frame utilization > > > > You want to graph sector utilization instead. > > > > I don’t know the odi tho > > > > Basically what you are seeing is that SU-MIMO maxes out when MU-MIMO takes > over and starts talking to multiple SMs. > > > > > > -Sean > > > > > > On Sun, Dec 13, 2020 at 8:23 PM Ken Hohhof <[email protected]> wrote: > > Anybody know the secret to checking or graphing frame utilization on a > Cambium 450m AP? The OID I am using is: > > > > 1.3.6.1.4.1.161.19.3.1.12.2.1.0 > > > > That works reliably on a regular 450i AP, but seems to be way pessimistic > on a 450m. I will see the graph peg at 100%, but then an hour or two later > the traffic graph will be double, so it seems like the AP wasn’t even close > to maxed out. I’m not sure what’s going on, perhaps the SMs with low > modulation are maxing out but the AP can still send lots more data to the > SMs with good modulation and that make use of MU-MIMO? Like screw you bad > boys, Santa’s going to give more presents to the good boys. > > > > Is there another OID I should be using? > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > > Sean Heskett > > ZIRKEL > Internet • WiFi • Phone • TV > 970-871-8500 x100 - Office > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
