Chr route?
Tushar > On Dec 21, 2020, at 11:42 AM, TJ Trout <[email protected]> wrote: > > > We just bought 5x brand new 1072s and they are rebooting by watchdog. > Upgraded ros and firmware, Disabled watchdog and then they hard freeze and > require a reboot. > > We are going chr route. 1072 is junk. > >> On Mon, Dec 21, 2020, 9:34 AM Dennis Burgess <[email protected]> wrote: >> Hate to say it, but worked. Keep in mind that these units that we have had >> this issue had been running for 3+ years, so, it was out of warranty >> anyways. >> >> >> >> >> >> >> >> Dennis Burgess, Mikrotik Certified Trainer >> MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE, MTCSE, HE IPv6 Sage, Cambium ePMP >> Certified >> >> Author of "Learn RouterOS- Second Edition” >> >> Link Technologies, Inc -- Mikrotik & WISP Support Services >> >> Office: 314-735-0270 Website: http://www.linktechs.net >> >> Create Wireless Coverage’s with www.towercoverage.com >> >> >> >> From: AF <[email protected]> On Behalf Of Josh Baird >> Sent: Monday, December 21, 2020 9:45 AM >> To: AnimalFarm Microwave Users Group <[email protected]> >> Subject: Re: [AFMUG] Mikrotik 1072 Frustrations >> >> >> >> Haha - "Get a new one" .. only with MT. >> >> >> >> >> >> >> >> On Mon, Dec 21, 2020 at 8:22 AM Dennis Burgess <[email protected]> >> wrote: >> >> Get a new one. That’s what we did, replaced it and the issue went away. >> Its like the 1072 has some kind of bug, or maybe a leaky cap, that >> eventually causes them to do this. No matter of fiddling fixes it, we >> swapped out the unit and have not have the same issue since. We have 1072s >> running 15gig inbound without issues. So, while I do attest that this is a >> MT (rather routeros) issue, we don’t have any data to know where it is >> unless the manufacture can tell us. So far they are tight lipped. >> >> >> >> >> >> >> >> Dennis Burgess, Mikrotik Certified Trainer >> MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE, MTCSE, HE IPv6 Sage, Cambium ePMP >> Certified >> >> Author of "Learn RouterOS- Second Edition” >> >> Link Technologies, Inc -- Mikrotik & WISP Support Services >> >> Office: 314-735-0270 Website: http://www.linktechs.net >> >> Create Wireless Coverage’s with www.towercoverage.com >> >> >> >> From: AF <[email protected]> On Behalf Of Steven Kenney >> Sent: Monday, December 21, 2020 12:56 AM >> To: af <[email protected]> >> Subject: Re: [AFMUG] Mikrotik 1072 Frustrations >> >> >> >> Their support is behaving the same way exactly. They told me to take the >> watchdog off and allow the internet to be frozen (downtime for all my >> customers) whenever it happens at any random point in the day/night while I >> rush to log into it with a serial cable. The absurdity of it. Luckily I >> told him from day one that I have a CONSOLE SERVER and that I log all the >> serial output of all my switches and routers. But even though I told them >> that a couple times they still requested I plug in a serial cable and wait >> for it to freeze. So I'm like .. hellooo there is a serial cable plugged in >> at all times! I told him there is no output. It just reboots. I even >> humored him and turned the watchdog off and we had a reboot on the weekend >> while the cable was plugged in and the console was logged in. I even had >> logging set to echo for a lot of things and nothing.. just a hard freeze. >> >> >> >> There is no BGP on this one and the processor is not high leading up to the >> crash at all. Updated 5 times already and its just a placebo. They need >> to get their shit together. >> >> >> >> >> >> >> >> STEVEN KENNEY >> DIRECTOR OF GLOBAL CONNECTIVITY & CONTINUITY A: 158 Erie St. N | Leamington >> ON >> E: [email protected] | P: 519-737-9283 >> W: >> https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.wavedirect.net&umid=D7E8655E-B6F3-F705-88EA-2A08303811DF&auth=079c058f437b7c6303d36c6513e5e8848d0c5ac4-a20d49e3e6a4f958e127c88b05686fb87748d1dd >> >> >> >> From: "Colin Stanners" <[email protected]> >> To: "af" <[email protected]> >> Sent: Monday, December 21, 2020 12:59:09 AM >> Subject: Re: [AFMUG] Mikrotik 1072 Frustrations >> >> >> >> This last year, I've seen a MikroTik CCR1072 switch from long being >> rock-solid to now having occasional random reboots (from watchdog) or 100% >> CPU usage, which strangles the BGP process. In the latter case, >> tools->profile would show the firewall taking 100% of CPU, even after >> temporarily disabling all firewall filter and NAT rules and connection >> tracking. Not fun. >> >> >> >> MT tech support did not seem super helpful or interested, mostly >> recommending to disable watchdog (unacceptable on a production router) or to >> upgrade firmware (without specifying the suspected cause of the problem or >> nature of the fix). >> >> >> >> Tried 1 update, that didn't seem to help, have now tried another... >> >> >> >> On Sun, Dec 20, 2020, 11:38 PM Steven Kenney <[email protected]> wrote: >> >> MIkrotik has been rock solid for me for years. Until this year and the >> 1072's. Random reboots set off by watchdog timer on all of my 1072's. Some >> more than others. Threads in the forum all discuss the same problem >> exactly. Its a connection tracking issue.. however I need connection >> tracking on one particular router. I've adjusted everything I could. >> Firmware and board firmware all up to date etc. Happens randomly with low >> levels of traffic, high levels of traffic, sometimes a couple times a day, >> sometimes weeks. No DDOS evidence at all from upstream routers. Configs >> checked and rechecked by third party experts. I graph everything about the >> Mikrotik and there are no clues or anything abnormal happening before the >> crash. Plenty of memory, disk space, CPU etc. Replaces all the >> trannies, power cables and such. Not running BGP only OSPF on the one that >> is giving me the most trouble. >> >> >> >> Even have a serial console cable plugged into them to my opengear and set it >> to log pretty much everything to console including the kernel and nothing. >> A hard freeze. >> >> >> >> Then there is Mikrotik support... I've never needed their support before >> until now. So I put a ticket in and the shitty attitude I'm getting from >> them seems like they KNOW there is something wrong with the hardware and >> they are intentionally not being helpful. It is pretty clear to see with >> all the people reporting this issue that there IS an issue. >> >> >> >> If this is any indication of how things are going to go with Mikrotik on the >> newer hardware going forware I think its time to jump to an enterprise level >> system. Juniper most likely. Shame because they are just about keeping up >> with the demands with their hardware. Getting closer to 100Gbps etc and >> ROS7 ... but at their current pace I think we've outgrew them. >> >> >> >> All the threads discussing this issue has been absolutely quiet when it >> comes to Mikrotik jumping in to mention or try to help troubleshoot. I >> think they know they had bad hardware out there and do not want to honor >> warranties. I've heard rumors of bad batches of 1072's. >> >> >> >> Anyone else encounter this? >> >> >> >> >> >> >> >> STEVEN KENNEY >> DIRECTOR OF GLOBAL CONNECTIVITY & CONTINUITY A: 158 Erie St. N | Leamington >> ON >> E: [email protected] | P: 519-737-9283 >> W: www.wavedirect.net >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
