Yeah, I think it would work... assuming they're still using the same/similar dishes.
On Thu, Feb 25, 2021 at 10:54 AM Nate Burke <[email protected]> wrote: > Are the front of the dishes flat so we can put the WBMFG clamp and scope > on it? That makes aligning AF24 links so easy, we don't even bother to > pull up the DBM reading while installing. The Trango24ghz dishes had an > angled front on them, so it wouldn't work with them. > > On 2/25/2021 10:08 AM, Mathew Howard wrote: > > Yeah, the MTI dishes that Siklu uses (at least the ones that I've seen are > MTI), have much nicer adjustments than the Bridgewave/Radiowaves dishes. > Anything at 80ghz is a pain to aim, but it helps if one adjustment doesn't > throw another one way off everytime you touch it. > > On Wed, Feb 24, 2021 at 5:56 PM Jaime Solorza <[email protected]> > wrote: > >> The Siklu adjustments on mounts are very accurate...the trick is to make >> sure mount is solid on structure...I mean solid...the Bridgewave mount we >> used three years ago were more difficult to align as bolt tightening moved >> the dish. >> Longest like was just under two miles >> It was a large project at Fort Bliss...we took three months to install >> hundreds of Siklu and Bridgewave PTP links, several hundred Cisco APs and >> Ubiquiti 3.65 links ... >> >> On Wed, Feb 24, 2021, 3:44 PM Nate Burke <[email protected]> wrote: >> >>> One of our distributors is trying to push us into an 80ghz link for a >>> 1.7 mile hop. Siklu says that 2' dishes on each side will have no rain >>> problems in our Rain zone 'K'. I have trouble believing that. Our AF24 >>> link that is in place now Fades during rain events. An AF60 link we >>> have at 0.4 miles also fades. What are real world experiences with >>> 80ghz? >>> >>> How hard is it to align 80ghz dishes, especially at that distance? We >>> once had to align a 24ghz 3' Trango dish that had no fine adjustments, >>> and it took almost 2 hours because the signal would change with every >>> turn of the UBolt. Same with the AF60 radio, but that mount bracket is >>> a pile of garbage anyway. I see they sell a fine adjustment bracket for >>> the AF60 now. >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
