FYI 450b is power polarity agnostic, so you don't need to swap pairs. On Sun, Apr 18, 2021 at 9:13 PM Sam Lambie <[email protected]> wrote: > > Hey all, > > I am running into some issues with a 450b PTP setup. The Slave is running at > 200' of cable and the radio powers up, but doesn't transmit. I got it to talk > to the BHM (450b) and toned in the signal at -58 on both ends for a couple of > days at one point then it fizzled out. Swapped channel and frequencies, No > connection. Spectrum scan on both sides shows a totally clean channel in many > spots, and I have tried them all. I swapped out the radio and the same thing > happened. So... I am thinking it's voltage drop with the dinky 0.5 amp PSU. > Does anyone make one that is 1-1.5 amps at 30vdc? > I am going to take a 24vdc 1 amp power supply from a Ubiquiti radio and swap > pairs on the Ethernet cable to see if I can get it to work and prove my > theory. > Has anyone ran into this situation? > > thanks, > > -- > -- > Sam Lambie > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
