If you're going to do the U-bolts, get those jagged V-clamps and put them between the J-pipe and the tower. Might be there's an old or broken antenna somewhere you can steal them from.
-----Original Message----- From: [email protected] <[email protected]> Sent: Wednesday, August 25, 2021 10:28 AM To: 'AnimalFarm Microwave Users Group' <[email protected]> Subject: RE: [AFMUG] Mounting a Jleg to a pipe When I did that, I just got a U-Bolt sized for the diameter of the tower leg and drilled matching holes in the footplate of the J pipe. But U-bolts don't hold that well IMO. We had a dish clamped like that which spun around in a windshear. It was still tight when the guy got up there to re-align it. M-TOW is a better solution. -----Original Message----- From: AF <[email protected]> On Behalf Of Nate Burke Sent: Wednesday, August 25, 2021 10:07 AM To: Animal Farm <[email protected]> Subject: [AFMUG] Mounting a Jleg to a pipe I know they exist, but my Googlefu is failing me. There's a set of UBolts that are spaced correctly to fit in to the LAG holes on a Jleg so that you can clamp the foot of a JLeg to a pipe. The Cambium part number is SGLN6552A, but they are big UBolts for the outside LAG Holes. Does anyone have a part/seller for the smaller UBolts that would go on the interior set of holes? -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
