those look like what we use On Wed, Aug 25, 2021 at 4:14 PM Nate Burke <[email protected]> wrote:
> I just picked up a set of these to see if they fit. > https://www.amazon.com/dp/B00NCBTFSW > > The problem we run into is the Force300 radio can't have the bracket > reversed, so when we mount to a steel building, we have to run a vertical > pipe between 2 horizontal girts, but then you sometimes can't get enough > rotation to align the dish, have to mount the JLeg to the vertical pipe to > get enough standoff. Can't mount the JLeg directly to the building because > there's not enough to hold the foot in place. > > On 8/25/2021 3:59 PM, Steve Jones wrote: > > the gold ones fit most, dont remember the p/n but primus anf perfect vision > carry them. all depends on your j arm foot > > On Wed, Aug 25, 2021 at 9:57 AM <[email protected]> <[email protected]> > wrote: > > > If you're going to do the U-bolts, get those jagged V-clamps and put them > between the J-pipe and the tower. Might be there's an old or broken > antenna > somewhere you can steal them from. > > -----Original Message----- > From: [email protected] <[email protected]> <[email protected]> > Sent: Wednesday, August 25, 2021 10:28 AM > To: 'AnimalFarm Microwave Users Group' <[email protected]> <[email protected]> > Subject: RE: [AFMUG] Mounting a Jleg to a pipe > > When I did that, I just got a U-Bolt sized for the diameter of the tower > leg > and drilled matching holes in the footplate of the J pipe. > But U-bolts don't hold that well IMO. We had a dish clamped like that > which > spun around in a windshear. It was still tight when the guy got up there to > re-align it. > M-TOW is a better solution. > > -----Original Message----- > From: AF <[email protected]> <[email protected]> On Behalf Of > Nate Burke > Sent: Wednesday, August 25, 2021 10:07 AM > To: Animal Farm <[email protected]> <[email protected]> > Subject: [AFMUG] Mounting a Jleg to a pipe > > I know they exist, but my Googlefu is failing me. There's a set of UBolts > that are spaced correctly to fit in to the LAG holes on a Jleg so that you > can clamp the foot of a JLeg to a pipe. > > The Cambium part number is SGLN6552A, but they are big UBolts for the > outside LAG Holes. Does anyone have a part/seller for the smaller UBolts > that would go on the interior set of holes? > > > > -- > AF mailing > [email protected]http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > -- > AF mailing > [email protected]http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
